EC 11481–2303—a peculiar subdwarf OB star revisited     

Thomas Rauch  Klaus Werner  Jeffrey W. Kruk 《Astrophysics and Space Science》2010,329(1-2):133-139

EC?11481–2303 is a peculiar, hot, high-gravity pre-white dwarf. Previous optical spectroscopy revealed that it is a sdOB star with T _eff=41?790 K, log?g=5.84, and He/H = 0.014 by number. We present an on-going spectral analysis by means of non-LTE model-atmosphere techniques based on high-resolution, high-S/N optical (VLT-UVES) and ultraviolet (FUSE, IUE) observations.We are able to reproduce the optical and UV observations simultaneously with a chemically homogeneous NLTE model atmosphere with a significantly higher effective temperature and lower He abundance (T _eff=55?000 K, log?g=5.8, and He/H=0.0025 by number). While C, N, and O appear less than 0.15 times solar, the iron-group abundance is strongly enhanced by at least a factor of ten.  相似文献   

Simulating coseismic deformation of quartz in the middle crust and fabric evolution during postseismic stress relaxation — An experimental study   总被引：3，自引：0，他引：3  

Claudia A. Trepmann  Bernhard Stckhert  Dorothe Dorner  Rasoul Hamidzadeh Moghadam  Martina Küster  Klaus Rller 《Tectonophysics》2007,442(1-4):83-104

Non-steady state deformation and annealing experiments on vein quartz are designed to simulate earthquake-driven episodic deformation in the middle crust. Three types of experiments were carried out using a modified Griggs-type solid medium deformation apparatus. All three start with high stress deformation at a temperature of 400 °C and a constant strain rate of 10^− 4 s^− 1 (type A), some are followed by annealing in the stability field of α-quartz for 14–15 h at zero nominal differential stress and temperatures of 800–1000 °C (type A + B), or by annealing for 15 h at 900 °C and at a residual stress (type A + C).The quartz samples reveal a very high strength > 2 GPa at a few percent of permanent strain. The microstructures after short-term high stress deformation (type A) record localized brittle and plastic deformation. Statisc annealing (type A + B) results in recrystallisation restricted to the highly damaged zones. The new grains aligned in strings and without crystallographic preferred orientation, indicate nucleation and growth. Annealing at non-hydrostatic conditions (type A + C) results in shear zones that also develop from deformation bands or cracks that formed during the preceding high stress deformation. In this case, however, the recrystallised zone is several grain diameters wide, the grains are elongate, and a marked crystallographic preferred orientation indicates flow by dislocation creep with dynamic recrystallisation. Quartz microstructures identical to those produced in type A + B experiments are observed in cores recovered from Long Valley Exploratory Well in the Quaternary Long Valley Caldera, California, with considerable seismic activity.The experiments demonstrate the behaviour of quartz at coseismic loading (type A) and subsequent static annealing (type A + B) or creep at decaying stress (type A + C) in the middle crust. The experimentally produced microfabrics allow to identify similar processes and conditions in exhumed rocks.  相似文献   

GGR Critical Review of Analytical Developments in 2004–2005     

Janet M. Hergt  L. Paul Bédard  Etienne Deloule  Klaus Peter Jochum  Kathryn L. Linge  Paul J. Sylvester  Matthias Willbold  Jon D. Woodhead 《Geostandards and Geoanalytical Research》2006,30(3):141-142

In 2005 Geostandards and Geoanalytical Research embarked upon a new initiative for its readers. Key researchers in various fields of geoanalytical technique development and their application were identified and invited to provide reviews pertinent to their expertise. As noted in the first of these publications "…instead of revisiting the historical context or decades of development in each analytical technique, the goal here has been to capture a snapshot of "hot topics" across a range of fields as represented in the… literature" (Hergt et al . 2005). Rather than prepare an annual review, a decision was taken earlier this year to provide a biennial summary of progress and accomplishments, in this case for the years 2004–2005. The principal techniques employed in Earth and environmental sciences are covered here, and include laser ablation and multicollector ICP-MS, ICP-AES, thermal ionisation and secondary ion mass spectrometry, as well as neutron activation analysis, X-ray fluorescence and atomic absorption spectrometry. A comprehensive review of the development of reference materials, often essential to these techniques, is also provided. The contributions assembled serve both to keep readers informed of advances they may be unfamiliar with, but also as a means of showcasing examples of the breadth and depth of work being conducted in these fields.  相似文献   

Reference Materials in Geoanalytical Research -Review for 2004 and 2005     

Klaus Peter Jochum  Matthias Willbold 《Geostandards and Geoanalytical Research》2006,30(3):143-156

This review gives an overview of the use and development of reference materials of geochemical and environmental interest in the literature of the years 2004 and 2005. In these years the performance of existing methods has been improved and new geochemical applications using new techniques have been developed. Accordingly, there was an increasing need for new reference materials, especially for in situ microanalysis and for precise stable isotope measurements. In addition, there was a notable trend for further characterisation of existing reference materials, mainly for the platinum-group elements. This review focuses on five topics: reference materials for platinum-group elements, reference glasses for in situ microanalysis, zircon reference materials, isotopic reference materials, and the development and certification of reference materials.  相似文献   

Post-collisional transition from calc-alkaline to alkaline magmatism during transcurrent deformation in the southernmost Dom Feliciano Belt (Braziliano–Pan-African, Uruguay)     

Pedro Oyhantabal  Siegfried Siegesmund  Klaus Wemmer  Robert Frei  Paul Layer 《Lithos》2007,98(1-4):141-159

In the southernmost Dom Feliciano Belt of Uruguay, highly fractionated calc-alkaline granites, mildly alkaline granites, shoshonitic volcanics, and peralkaline intrusions and volcanics are spatially and temporal associated with the evolution of shear zones. Four representative magmatic unites of this diverse association were petrographic and geochemically investigated: the Solís de Mataojo Complex, a medium to high K2O calc-alkaline granite with signature typical of mature continental arcs and post-collisional settings; the Maldonado granite, highly fractionated calc-alkaline to alkaline, with characteristics that are transitional between both types of series; the Pan de Azúcar Pluton, with characteristics typical of post-collisional alkaline granites and the Las Flores shoshonitic basalts.

Geochemistry and geotectonic setting point out that slab breakoff was most likely the mechanism associated with the generation of high-K calc-alkaline magmas (Solís de Mataojo and Maldonado) shortly after collision. Extension associated to the formation of molassic basins and emplacement of dolerites and basalt flows with shoshonitic affinity (Las Flores) 15and finally a shift to magmas with alkaline signatures (Pan de Azúcar) simultaneous with a second transpressional phase were probably linked with lithospheric thinning through delamination. This evolution took place between 615 and 575 Ma, according to available data. Contrary to previous proposals, which considered this magmatism to represent the root of a continental magmatic arc, a post-collisional environment, transitional from orogenic to anorogenic, during transcurrent deformation is proposed.  相似文献   

Pre-Cenozoic intra-plate magmatism along the Central Andes (17–34°S): Composition of the mantle at an active margin     

Friedrich Lucassen  Gerhard Franz  Rolf L. Romer  Frank Schultz  Peter Dulski  Klaus Wemmer 《Lithos》2007,99(3-4):312-338

Sr–Nd–Pb isotope ratios of alkaline mafic intra-plate magmatism constrain the isotopic compositions of the lithospheric mantle along what is now the eastern foreland or back arc of the Cenozoic Central Andes (17–34°S). Most small-volume basanite volcanic rocks and alkaline intrusive rocks of Cretaceous (and rare Miocene) age were derived from a depleted lithospheric mantle source with rather uniform initial ¹⁴³Nd/¹⁴⁴Nd ( 0.5127–0.5128) and ⁸⁷Sr/⁸⁶Sr ( 0.7032–0.7040). The initial ²⁰⁶Pb/²⁰⁴Pb ratios are variable (18.5–19.7) at uniform ²⁰⁷Pb/²⁰⁴Pb ratios (15.60 ± 0.05). A variety of the Cretaceous depleted mantle source of the magmatic rocks shows elevated Sr isotope ratios up to 0.707 at constant high Nd isotope ratios. The variable Sr and Pb isotope ratios are probably due to radiogenic growth in a metasomatized lithospheric mantle, which represents the former sub-arc mantle beneath the early Palaeozoic active continental margin. Sr–Nd–Pb isotope signatures of a second mantle type reflected in the composition of Cretaceous (one late Palaeozoic age) intra-plate magmatic rocks (¹⁴³Nd/¹⁴⁴Nd  0.5123, ⁸⁷Sr/⁸⁶Sr  0.704, ²⁰⁶Pb/²⁰⁴Pb  17.5–18.5, and ²⁰⁷Pb/²⁰⁴Pb  15.45–15.50) are similar to the isotopic composition of old sub-continental lithospheric mantle of the Brazilian Shield.

Published Nd and Sr isotopic compositions of Mesozoic to Cenozoic arc-related magmatic rocks (18–40°S) represent the composition of the convective sub-arc mantle in the Central Andes and are similar to those of the Cretaceous (and rare Miocene) intra-plate magmatic rocks. The dominant convective and lithospheric mantle type beneath this old continental margin is depleted mantle, which is compositionally different from average MORB-type depleted mantle. The old sub-continental lithospheric mantle did not contribute to Mesozoic to Cenozoic arc magmatism.  相似文献   

Restoration of submerged vegetation in shallow eutrophic lakes – A guideline and state of the art in Germany     

Sabine Hilt  Elisabeth M. Gross  Michael Hupfer  Harald Morscheid  Jens Mhlmann  Arnulf Melzer  Jens Poltz  Stefan Sandrock  Eva-Maria Scharf  Susanne Schneider  Klaus van de Weyer 《Limnologica》2006,36(3):155-171

One of the most serious problems caused by eutrophication of shallow lakes is the disappearance of submerged macrophytes and the switch to a turbid, phytoplankton-dominated state. The reduction of external nutrient loads often does not result in a change back to the macrophyte-dominated state because stabilising mechanisms that cause resilience may delay a response. Additional internal lake restoration measures may therefore be needed to decrease the concentration of total phosphorus and increase water clarity. The re-establishment of submerged macrophytes required for a long-term stability of clear water conditions, however, may still fail, or mass developments of tall-growing species may cause nuisance for recreational use. Both cases are often not taken into account when restoration measures are planned in Germany, and existing schemes to reduce eutrophication consider the topic inadequately. Here we develop a step-by-step guideline to assess the chances of submerged macrophyte re-establishment in shallow lakes. We reviewed and rated the existing literature and case studies with special regard on (1) the impact of different internal lake restoration methods on the development of submerged macrophytes, (2) methods for the assessment of natural re-establishment, (3) requirements and methods for artificial support of submerged macrophyte development and (4) management options of macrophyte species diversity and abundance in Germany. This guideline is intended to help lake managers aiming to restore shallow lakes in Germany to critically asses and predict the potential development of submerged vegetation, taking into account the complex factors and interrelations that determine their occurrence, abundance and diversity.  相似文献   

Towards 3D map generation from digital aerial images     

Lukas Zebedin  Andreas Klaus  Barbara Gruber-Geymayer  Konrad Karner 《ISPRS Journal of Photogrammetry and Remote Sensing》2006,60(6):413

This paper describes the fusion of information extracted from multispectral digital aerial images for highly automatic 3D map generation. The proposed approach integrates spectral classification and 3D reconstruction techniques. The multispectral digital aerial images consist of a high resolution panchromatic channel as well as lower resolution RGB and near infrared (NIR) channels and form the basis for information extraction.Our land use classification is a 2-step approach that uses RGB and NIR images for an initial classification and the panchromatic images as well as a digital surface model (DSM) for a refined classification. The DSM is generated from the high resolution panchromatic images of a specific photo mission. Based on the aerial triangulation using area and feature-based points of interest the algorithms are able to generate a dense DSM by a dense image matching procedure. Afterwards a true ortho image for classification, panchromatic or color input images can be computed.In a last step specific layers for buildings and vegetation are generated and the classification is updated.  相似文献   

Precise orbit determination for the GRACE mission using only GPS data   总被引：1，自引：1，他引：1  

Zhigui Kang  Byron Tapley  Srinivas Bettadpur  John Ries  Peter Nagel  Rick Pastor 《Journal of Geodesy》2006,80(6):322-331

The GRACE (gravity recovery and climate experiment) satellites, launched in March 2002, are each equipped with a BlackJack GPS onboard receiver for precise orbit determination and gravity field recovery. Since launch, there have been significant improvements in the background force models used for satellite orbit determination, most notably the model for the geopotential. This has resulted in significant improvements to orbit accuracy for very low altitude satellites. The purpose of this paper is to investigate how well the orbits of the GRACE satellites (about 470 km in altitude) can currently be determined using only GPS data and based on the current models and methods. The orbit accuracy is assessed using a number of tests, which include analysis of orbit fits, orbit overlaps, orbit connecting points, satellite Laser ranging residuals and K-band ranging (KBR) residuals. We show that 1-cm radial orbit accuracy for the GRACE satellites has probably been achieved. These precise GRACE orbits can be used for such purposes as improving gravity recovery from the GRACE KBR data and for atmospheric profiling, and they demonstrate the quality of the background force models being used.  相似文献   

Aquifer development planning to supply a seaside resort: a case study in Goa,India     

J. P. Cárcomo Lobo Ferreira  Maria da Conceição Cunha  A. G. Chachadi  Kai Nagel  Catarina Diamantino  Manuel Mendes Oliveira 《Hydrogeology Journal》2007,15(6):1147-1155

Using the hydrogeological and socio-economic data derived from a European Commission research project on the measurement, monitoring and sustainability of the coastal environment, two optimization models have been applied to satisfy the future water resources needs of the coastal zone of Bardez in Goa, India. The number of tourists visiting Goa since the 1970s has risen considerably, and roughly a third of them go to Bardez taluka, prompting growth in the tourist-related infrastructure in the region. The optimization models are non-linear mixed integer models that have been solved using GAMS/DICOPT++ commercial software. Optimization models were used, firstly, to indicate the most suitable zones for building seaside resorts and wells to supply the tourist industry with an adequate amount of water, and secondly, to indicate the best location for wells to adequately supply pre-existing hotels. The models presented will help to define the optimal locations for the wells and the hydraulic infrastructures needed to satisfy demand at minimum cost, taking into account environmental constraints such as the risk of saline intrusion.

---

Résumé A l’aide de données hydrogéologiques et socio-économiques, dérivées d’un projet de recherche de la Commission Européenne sur l’étude, la surveillance et la durabilité de l’environnement c?tier, deux modèles d’optimisation ont été appliqués en vue de satisfaire les besoins futurs en ressources en eau de la zone c?tière de Bardez au Goa en Inde. Le nombre de touristes qui visitent le Goa depuis les années 70 a considérablement augmenté et environ un tiers d’entre eux se rend à Bardez taluka, ce qui encourage la croissance des infrastructures liées au tourisme dans la région. Les modèles d’optimisation sont des modèles non linéaires mixtes en nombres entiers qui ont été résolus en utilisant le logiciel commercial GAMS/DICOPT++. Les modèles d’optimisation ont été utilisés pour indiquer premièrement les zones les plus appropriées pour construire des stations balnéaires et des puits pour approvisionner en quantité d’eau suffisante l’industrie touristique, et deuxièmement pour indiquer la meilleure localisation de puits pour l’alimentation des h?tels préexistants. Les modèles présentés aideront à définir les localisations optimales des puits et des infrastructures hydrauliques nécessaires à la satisfaction de la demande à un co?t minimum, tout en prenant en compte les contraintes environnementales, tel que le risque d’intrusion saline.

---

Resumen Se han aplicado dos modelos de optimización en base a datos socio-económicos e hidrogeológicos derivados de un proyecto de investigación de la Comisión Europea sobre medición, monitoreo y sostenibilidad del ambiente costero para satisfacer las necesidades futuras de recursos hídricos de la zona costera de Bardez en Goa, India. El número de turistas que visita Goa desde la década de 1970′s ha subido considerablemente y cerca de un tercio de ellos van a Bardez taluka impulsando el crecimiento en la infraestructura turística de la región. Los modelos de optimización son modelos de números enteros mixtos no-lineales que se han resuelto usando el programa comercial GAMS/DICOPT++. Los modelos de optimización se usaron, primero para indicar las zonas más adecuadas para la construcción de centros de diversión en las márgenes del océano y pozos para abastecer la industria turística con una adecuada cantidad de agua, y segundo, para indicar la mejor localización de pozos para el abastecimiento de hoteles pre-existentes. Los modelos que se presentan ayudarán a definir las localizaciones óptimas para los pozos y las infraestructuras hidráulicas necesarias para satisfacer la demanda al mínimo costo, tomando en consideración restricciones ambientales tal como el riesgo de intrusión salina.

  相似文献